Mitsubishi Car Brake Disc Rotors

About Mitsubishi Car Brake Disc Rotors

Key Considerations:

1. Compatibility:

   • Ensure the brake disc rotors are compatible with your specific Mitsubishi model and year. Different models may have different rotor sizes and specifications.

2. Types of Brake Rotors:

   • Solid Rotors: Standard type of rotors, usually found on the rear wheels of many cars.
   • Vented Rotors: Designed with vents between the rotor surfaces to dissipate heat more effectively, commonly used on the front wheels.
   • Slotted Rotors: Have grooves cut into the surface to improve braking performance by reducing gas and dust buildup.
   • Drilled Rotors: Feature holes drilled into the surface to improve heat dissipation and reduce the risk of brake fade.
   • Drilled and Slotted Rotors: Combine the benefits of both drilled and slotted designs for enhanced performance.

3. Material:

   • Cast Iron: Most common material, provides good performance and durability.
   • Carbon Composite: Lightweight and high-performance, often used in high-end and sports cars.
   • Ceramic: High-performance material with excellent heat dissipation, commonly used in racing applications.

4. Driving Conditions:

   • Consider your driving habits and conditions. If you drive aggressively, tow heavy loads, or frequently drive in mountainous areas, you might need high-performance rotors.

5. Brands:

   • Brembo: Known for high-performance braking components.
   • EBC Brakes: Offers a range of rotors for different driving styles.
   • Bosch: Provides reliable and high-quality rotors.
   • ACDelco: Known for durable and affordable brake components.
   • PowerStop: Popular for performance rotors and brake kits.

Steps for Replacement:

1. Gather Necessary Tools:

   • Jack and jack stands
   • Lug wrench
   • Socket set and wrenches
   • Brake cleaner
   • Screwdriver or impact driver
   • C-clamp or brake caliper tool

2. Safety First:

   • Work on a flat surface, use wheel chocks, and ensure the car is securely lifted and supported by jack stands.

3. Remove the Wheel:

   • Use a lug wrench to remove the wheel and set it aside.

4. Remove the Brake Caliper:

   • Use a socket or wrench to remove the bolts holding the brake caliper. Hang the caliper securely using a bungee cord or wire to avoid stressing the brake line.

5. Remove the Old Rotor:

   • Remove any retaining screws or clips holding the rotor in place. If the rotor is stuck, gently tap it with a rubber mallet to loosen it.

6. Clean and Inspect:

   • Clean the hub surface with a wire brush and brake cleaner. Inspect the hub for any damage or corrosion.

7. Install the New Rotor:

   • Place the new rotor onto the hub and secure it with retaining screws or clips if applicable.

8. Reinstall the Brake Caliper:

   • Compress the brake caliper piston using a C-clamp or brake caliper tool to fit over the new rotor. Reattach the caliper and tighten the bolts securely.

9. Reinstall the Wheel:

   • Place the wheel back onto the hub and tighten the lug nuts by hand.

10. Lower the Car and Torque the Lug Nuts:

• Lower the car to the ground and use a torque wrench to tighten the lug nuts to the manufacturer's specifications.

11. Test the Brakes:

• Pump the brake pedal a few times to ensure the brake pads are properly seated against the new rotors. Test drive the car to ensure the brakes are functioning correctly.

By following these steps and considering the key points, you can successfully replace the brake disc rotors on your Mitsubishi car, ensuring safe and effective braking performance.